Pool pump is as important to a swimming pool as
First and foremost, you are advised to make sure whether your pump is getting required power or not. Is everything ok with its functioning? All the wires connected to the pump need to be checked to detect any hidden corrosion. If you find any problem in the continuous functioning of the motor, then it is wise to examine the impeller. You can bring the cleaning process into use if there is any junk in the impeller. If everything is fine with the impeller then you must have a look at the wiring or the capacitor or the pump. The problem with the capacitor may cause its repair or replacement. If you still notice that there is something wrong with the functioning of your pump, then you must make whether your filter is choked up or not. Clean your filter properly. Sometimes you might find the problem due to choking up the system through junk material. To overcome such problem, you can bring the cleaning process into use in the areas around the pool skimmer basket. While carrying the responsibility of the pool pump repair job, you might also notice that the pump is sucking in air. In such case, there will be a need of the increment in the water lever of your swimming pool. In addition to it, you are also suggested to inspect the 'O' ring found on the lid of your pump. You can check whether it has been greased properly or not and does not contain any cracks.